Changes in DYNAMICS R4.10.0
- Added non-linear element [Crack].
- Added non-linear element [Seal Floating Ring].
- Added the [Base mass] element with the setting of mass values by degrees of freedom.
- Added output in the [Imbalance behavior] and [Nonlinear analysis] algorithms of XY and XYZ graphs (several curves on one graph).
- Corrected editing of coordinates in the dialog for adding a section to an existing element.
- Fixed a crash at the end of the [Nonlinear Analysis] calculation with the results being cleared if there was a previously loaded calculation.
- When automatically replacing Beam elements with a shell, synchronization of the element name and its type has been added.
- The [Update element names] command has been added to the subsystem context menu to synchronize the name with the element type.
- Added display of mass-inertial characteristics of the active element in the 2D model window.
- The calculation of vibration modes in the [Natural frequencies] and [Critical velocities] algorithms for models with asymmetrical stiffness and damping matrices has been corrected.
- Fixed program crash when switching to wire mode, active subsystem, etc. in the animation mode of forced oscillations.
- The calculation of vibration modes of the [Natural frequencies] and [Critical velocities] algorithms for systems with asymmetrical stiffness and damping matrices has been corrected.
- Fixed restoration of the full 12×12 stiffness matrix for systems with asymmetrical matrices and a flexible base.
- Fixed a crash in the program when calculating a parametric analysis map for natural frequencies with basis recalculation turned off.
- Fixed quick transition by double click to the subsystem section from the communication settings (connection via body). Previously, the transition occurred without taking into account the displacement of the local CS.
- Fixed a program crash when pressing the [=] button in the variable editing dialog when there is no entered data.
- Fixed crash of the program when using the [Global coordinates] communication context menu command when connecting the connection only to Side2.
- Fixed a crash in the program when switching the list of critics in the Critical Speed Map during a re-calculation.