Changes in DYNAMICS R4.15.0.7450
- Added Squirrel Wheel 6DOF connection that models the elastic elements of a squirrel wheel
- Added functionality to identify shapes in sustainability maps
- Added recalculation of API610/GOST 32601-2022 zone for logarithmic decrement LnDec
- The boundaries of the stability graph are automatically adjusted to the zone from API610/GOST 32601-2022 standards when displaying a map in LocusDR mode
- Added an alternative setting for visualizing the elements [Disk], [Mass], [Generalized Element] as beams
- Added setting of offset along the z axis for visualization of the [Mass] and [Base Weight] elements
- The compliance matrix in the information dialog of the calculated element properties is displayed for 6 degrees of freedom for both isotropic and orthotropic elements
- Fixed: Roller bearings were not displaying maximum contact pressures in the life calculation results
- Fixed: Hotkeys for moving through the history of active elements (ctrl+shift+z/y) do not work
- Fixed shift of the element’s property table when selecting one of the last properties, if all the properties do not fit in the panel
- Fixed switching of units of measurement for the compliance matrix in the information dialog of the calculated properties of the element