Changes in DYNAMICS R4.15.5.7830
- Added animation output in the results of Unbalanced Response and Transient Response with assemblies’ separation
- Added animation output in the results of Unbalanced Response and Transient Response for the selected response range on the 2D chart
- Added output of 3D forced oscillation shapes for the current point on the Unbalanced Response or Transient Response plots
- Added output of 2D graphs of forced oscillation shapes (absolute values) for the current point on the Unbalanced Response plot
- Added output of forced oscillation shapes in the mode of sorting data by rotation speed (previously in Transient Response there was an output only when output sorting was by integration time)
- Added export/import of MKD beams to the command simulation interface
- Added output to the orbit header of time, interval and rotation speed when sorting mode is enabled
- Added a button to export current curves from Unbalanced Response and Transient Response plots to variables (saving the calculated case for subsequent overlay)
- Added overlay of variables to graphs of Unbalanced Response and Transient Response (if a group of variables in the tree is selected, all variables will be added). Used to overlay the results of other calculation cases or experiments
- Added initialization of lines from the clipboard in the variable editing dialog when pasting tabular data with a number of lines exceeding the number of lines in the variable table
- Added filtering of subsystems in the sorting by rotation speed list (only subsystems with non-zero rotation are left)
- The functionality of adding an Orbit by the cursor position in the response output (Mean value output as well) has been implemented. If sorting by speed is enabled, the interval is calculated to show 5 cycles at the selected rotation speed
- When add orbit button pressed while holding down the Shift key, the FFT algorithm is added for the current point on the Transient Response
- When adding any Link element, the name of the active Connection Point is used
- Corrected accounting of mass-inertial properties of the MKD beam for the cylinder case
- In the Shaft properties protocol the consideration of the total coefficients of axial and torsional flexibility of the elements [MKD beam] and [Bimetallic beam] were added
- Calculation of potential energies for systems and shapes orthotropic by rotation angle with significant angular deformations in the orthotropic element were fixed
- Fixed animation output in Unbalanced Response results for rotors with multiple subsystems (a section of the shape of first subsystem was repeated)
- Fixed initial orientation of the model when switching to animation mode
- Fixed VRML visualization file offset when assemblies are separated for subsystems with offset along the radial X or Y axes
- Fixed crash when outputting forced oscillation shape in XY mode
- Updated dongle drivers in the installer. Improved compatibility with Windows 11