Changes in DYNAMICS R4.14.0.6525
- The interface (pre and post processing of results) now works only in x64 OS architecture.
- The restriction on the number of sections for models calculated from the GUI has been removed (previously it was necessary to use the x64 console solver).
- Simulation command interface and protocols now use Python 3.
- Accelerated calculation of complex models in non-stationary and parametric analysis.
- Added calculation of stiffness and damping curves for Throat seals in DynFB.
- Added element Elastic ring (Alyson’s Ring).
- Added hysteresis friction model to AFB gas dynamic bearings.
- Now the waveforms are not recalculated if the Basis was previously calculated (the calculation of all algorithms on complex models has been accelerated).
- Added the ability to create lists of sensor cross sections in the results of the [Imbalance Behavior] and [Nonlinear Analysis] algorithms for joint display on the chart.
- Added selection of the spectrum in the results of the [Waterfall diagram] algorithm by clicking the LMB or using the arrows on the keyboard.
- Added placement of flags on the selected spectrum in the results of the [Waterfall Diagram] algorithm by double-clicking the LMB.
- Added a command to convert [Quasi-linear connection] with parameterized stiffness and damping matrices to the [Connection] element for the selected mode.
- Added a button to convert the axis from rpm to Hz when sorting by rpm in the results of the [Imbalance Behavior] and [Nonlinear Analysis] algorithms.
- Added calculation stop in case of an error in the script of the [Custom connection] element.
- Improved work of the variable editing dialog. When you click on the cells in the table, a point is marked on the graph.
- Updated chart output module.
- Improved visualization in the 3D view of the model.
- Fixed a crash during successive fast switching of sections in algorithms for post-processing the results of non-stationary analysis.
- Fixed crash when canceling (Undo) deleting an algorithm from a model.
- Fixed expansion of the model into assemblies when moving from algorithms to a model.
- The basis was not automatically recalculated if a variable in the model was changed.
- The basis was not automatically recalculated if elements were switched on/off in groups and when submodels were reloaded.
- Fixed model loading from scripts with Cyrillic on the way.
- Fixed minor errors when exporting to a script.
- Fixed launching the console solver with models with Cyrillic characters in the path or model name.
- Fixed memory leaks during sequential calculations of the [Nonlinear Analysis] algorithm.
- Fixed artifacts from old data on successive calls to the dialog for outputting forced vibration shapes.
- Fixed reset of zoom and results settings when switching algorithms.
- Fixed crash after multiple (about 100) switching of views and algorithms.